PPS Compressed Air System

100% Aluminum Solution

Why Aluminum is the Ideal Choice

Section2-01-alu-lisse
Corrosion Resistant

Aluminium alloy for pipe durability and constant airflow.

Section2-02-turbulence-acier-versus-alu
Minimal Pressure Loss

Smooth inner surface allows air to circulate freely without turbulence.

Section2-03-leger-facile-installer
Quick Installation

Lightweight pipes resulting in a 4X faster installation than steel.

Section2-04-etancheite-01-1
Optimal Leaktight

Design and unique assembly method ensuring a zero-leak system.

Section2-tableau-couts-EN-1

Real Project Costs

Aluminium pipes help to reduce installation costs and maintenance fees. They also deliver energy efficiency over many years.

Wide Variety of Diameters, Simplified Assembly Method

The Topring PPS pipes are lightweight and designed to be corrosion, UV and heat resistant. Their design allows for simplified installation with all diameters.

Section5-diametres

Available Diameters and Lengths

  • 16 mm (4m/13 ft)
  • 20-25-32 mm (4m/13 ft) (5.5m/18 ft)
  • 40-50-63-80 mm (5.5m/18 ft)
  • 100 mm (5.5m/18 ft)
Unique Design Ensuring a Zero-Leak System

Topring PPS fittings are entirely made of aluminium. The double-lobe gasket ensures the hermeticity of the system. An assembly gel free of oil or any type of contaminant facilitates the insertion of the pipe into the fitting. It is NSF H1 accredited and meets the requirements of the most stringent applications (food, chemical, pharmaceutical, cosmetics, etc.) The stainless steel ring with gripping teeth ensure increased grip and strength.

Available Configurations

union-droit-1
Unions

Union – Reducing union – Female threaded connector – Male threaded connector – End cap

coude
Elbows

90° elbow union – 90° male threaded elbow – 45° elbow union

union-en-t-1
Tees

Equal tee – Reducing tee – Female threaded tee

raccord-specialise-1
Specialized Unions

Expansion connector – Sliding union

Innovative Approach Using Cutting Edge Technologies

Simplified Installation

The Topring PPS take-off drop couplings allow to install drop legs to supply workstations on new or existing compressed air piping systems in previously unimaginable situations. No more need for a U-shaped drop.

No Condensate

Take-off drop coupling prevent main line water from infiltrating the air outlets.

Optimal Flow Rate

Take off drop coupling internal diameter ensures unrestricted airflow.

pps-eng-image-1

Topring PPS Catalogue

This catalogue contains a range of products for 100% aluminum compressed air systems.

miniature-formation-conception-reseau-air-comprime

Instant Training

Learn how to optimally plan a compressed air network. This 20-minute training presents the important elements to consider when designing a network.

Section9-guide-conception-eng

Modular Design

Topring PPS compressed air system is fully adaptable and scalable to existing and future installations. Read the PPS Technical Manual for tips on how to plan your compressed air system.

3d-modeling

3D Models Available

3D models of all Topring PPS system parts are available in STEP format to allow you to model your future system.

technical-drawing

National Master Specifications

We have updated the National Master Specifications (NMS) for compressed air system.

The changes concern the technical specifications in section 221500.

Download your Topring edited copy of the National Master Specification (NMS).

Section13-guide-installation-eng

Installation 4X Faster than Steel

The Topring PPS piping system uses a simple threadless assembly method for all pipe diameters. This feature of the system makes installation quick and easy to master. Few tools required. You only need to cut and chamfer the pipes. See for yourself how easy it is to assemble the system by downloading the PPS installation guide.

Ready to Use

Once installed, the system can be immediately pressurized (incrementally) and tools can be connected. Discover our large selection of manifolds with quick couplers, as well as some safety quick couplers options to complete your system.

Certifications

logo-certification-crn

All PPS pipes, fittings and ball valves are registered under the Canadian Registration Number (CRN)

logo-certification-tssa

All products are registered with Technical Standard & Safety Authority (TSSA)

logo-certification-asme

All products meet the requirements of ASME B31 / ASME B31.1 / ASME B31.3

logo-certification-ce

All products are in compliance with the European Pressure Equipment Directive (PED) 2014/68 / EU

logo-certification-flame

Complies with STANDARD 13501-1: 2018 fire protection standard

logo-certification-ul

Complies with the flammability safety standard UL 723 -ASTM E84 UL 94 HB

logo-certification-uv

UV resistance

logo-certification-atex

All products comply with the ATEX Directive: 2014/34 / EU Zone 1 & 2 – 21 & 22

logo-certification-iso-8573

All products conform to ISO 8573:2001 & 2010 Classe 0.0.0

logo-certification-oil-free

Oil free

logo-certification-silicone-free

Silicone free

logo-certification-qualicoat

The aluminum tubes comply with the QUALICOAT label, which guarantees the quality of the painting process, the chemicals used, the finish and the resistance of the aluminum tubes.

logo-certification-nsf

NSF-H1 certified lubricant for the food industry

logo-certification-reach

Compliant with REACH regulation EC1907/2006

logo-certification-rohs

RoHS compliant

logo-certification-recyclage

All TOPRING PPS materials are
recyclable

logo-certification-tuv

Quality system ISO9001-2015 certified

Technical Specifications

Topring PPS System

Maximum working pressure 

16 to 80 mm: 232 PSI (16 BAR) 

100 mm: 191 PSI (13 BAR)

 

Fluids 
Compressed air 
Vacuum 
Inert gases 
Nitrogen 

 

Vacuum level 

-28.94 in Hg / -0.98 BAR 

Burst pressure 

16 to 80 mm: Coefficient of 5:1(232 PSI x 5 = 1 160 PSI) 

100 mm: Coefficient of 6:1(191 PSI x 6 = 1 146 PSI) 

 

Environment 

Materials 100% recyclable 

Silicone-free

Oil free

 

Working temperature 

-20 to 80 °C 

Resistance to 

Corrosion 

Harsh environment 

Mechanical shocks 

Thermal variations 

Mineral and synthetic compressor oils 

Ultraviolet (UV) 

Topring PPS pipes 

 

Materials

EN AW 6063 extruded aluminium alloy

 

Coating 

Electrostatic paint (compliant with RoHS standard) 

 

Color 

Blue RAL 5012 (ISO color) 

 

Diameters and lengths 

16 mm (4m/13 ft) 

20-25-32 mm (4m/13 ft) (5.5m/18 ft) 

40-50-63-80 mm (5.5m/18 ft) 

100 mm (5.5m/18 ft)

 

Manufacturing process 

Calibrated extrusion 

Non-welded 

Topring PPS fittings 

 

Materials 

100% aluminium body and nut, EN AB 46100 

Stainless steel gripping Teeth 

NBR seal with Teflon coated treatment 

 

Diameters 

16 mm 

20-25-32 mm 

40-50-63-80 mm 

100 mm

 

Operating pressure graph according to the temperature of the PPS system in comparison with a system of aluminum pipes and plastic fittings

tableau-psi-PPS-EN

* 100mm pipe and fittings allow maximum pressure up to 191 PSI at temperatures between -20 to 80°C.

 

These Companies Trust the PPS Compressed Air System

logo-cascade-reseau-air
deschenes-logo-reseau-air
nfh-logo-reseau-air
micro-bird-logo-reseau-air
artopex-logo-reseau-air
annexair-logo-reseau-air
paco-logo-reseau-air
contact rep

Schedule a Meeting with a Technical Advisor

Our team of technical advisors is available to discuss your project with you and answer your questions.

FAQ
Are the PPS system products under warranty?

All pipes and fittings in the system have a 10-year warranty.

What is the maximum operating temperature and pressure of the Topring PPS system?

In an environment where the temperature is between -20° and 80°C, the maximum operating pressure is 232 PSI (16 BAR).

What are the delivery times?

Topring has a large inventory of parts and delivery times are fast. A dropshipping service is also available.

Do all components of the PPS system have a CRN number?

All fittings, pipes and ball valves have a CRN number for all of Canada.

What tools are needed to install the PPS system?

No specialized machinery is required to install the PPS system. See the Installation section for more information.

Can the PPS pipes be bent or modified to change the right angle?

No, the pipes must retain their original right angle to ensure their strength. Specific parts are available to work around obstacles (deflection pipes, 45° or 90° elbows, Tee unions, etc.).

Who can install a PPS system?

Topring offers all the support needed to find a qualified installer.

Is the PPS system food certified?

The Topring PPS system is in the process of being food certified. For more information, contact a Topring technical advisor.